background image

10

6.3  Storage of accessories

The standard accessories 
( nozzles (a), spray handle (b), 
spray lance (c), foam sprayer 
(d)) can be stored on the pres-
sure washer.

The nozzle cleaning tool (e) can 
also be stored on the  product.

6  After using your pressure washer

6.2  Winding up of electric  

cable and high pressure  
hose 

To avoid accidents, the electric 
cable and the high pressure 
hose should always be wound 
carefully up.

1. Wind up the electric cable on 

the appropriate hooks.

6.1  Storing the washer

The machine should be 
stored in a frost-free room!

Pump, hose and accessories 
should always be emptied of 
water prior to storing as follows:

1. Stop the machine (press 

the start/stop switch “

O

” (1) 

and detach water hose and 
 accessory.

2. Restart the machine and 

activate the trigger. Let the 
machine run until no more 
water runs through the spray 
gun.

3. Stop the machine, unplug 

and wind up hose and cable. 

4. Place spray handle, nozzles 

and other accessories in the 
holders of the machine.

Should the machine by mistake 
be frozen, it will be necessary 
to check it for damage.

NEVER START-UP A FROZEN 
MACHINE

.

Frost damages are not 
 covered by the  guarantee!

Summary of Contents for Classic 120.1



















Reviews: