DAN0807
23
3. DUST BAG (SEE FIG.
D, E)
You must use the dust collection bag provided to collect the dust produced during sanding. To attach, insert
the dust collection bag into the dust extraction outlet. Make sure the dots of the outlet are locked in the slot
of the dust bag. (See fig. F) When the dust collection bag is full, remove and empty by opening the zip on the
dust bag (6). (See fig. E)
4. SAFETY ON-
OFF SWITCH
(SEE FIG. F)
ON/OFF SWITCH
Depress to start and release to stop your tool.
SWITCH LOCK
-ON BUTTON (SEE FIG. F)
Depress on/off switch (2) then lock on button (3).
Your tool is now locked on for continuous use. To
switch off your tool just depress and release the
on/off switch.
5. VARIABLE SPEED CONTROL
(SEE FIG. G)
Adjust the variable speed control dial (4) to increase
or decrease the speed according to the material and
sanding belt specification to be used (also possible
during no load operation). Avoid prolonged use at
very low speed as this may damage your sander’s
motor.
6.
OPERATING THE TOOL
(SEE FIG. H)
Always hold your belt sander firmly with both hands
when operating.
7.
INSPECTING THE SANDING BELT
Since continued use of a worn-out sanding belt will
degrade efficiency, replace the sanding belt as soon
as excessive abrasion is noted.
