3.
Mark and drill your pilot holes.
These are the small holes that will allow your
mounting screws to enter the wall. You’ll probably want a partner for this.
•
Hold the GermAwayUV mounting bracket up to the wall. Use a level to
make sure it’s straight.
•
Using a pencil, make light marks where you’ll drill the holes to attach it to
the wall.
•
Attach the 3/32” drill bit to your drill, and drill holes where you marked
using the mount.
4.
Attach the mounting bracket to the wall.
Hold your mount to the wall and drive
the 4 #10 screws (included) into the pilot holes you made in the previous step.
Drive them until the lag screws are snug against the mounting plate.
5.
Attach the GermAwayUV Centurion to the mounting plate.
•
With a helper, lift the Centurion over the mounting plate and hood the
receiving slots onto the pegs at the top of the mounting plate.
•
Carefully guide the Centurion down so that it becomes flush against the
mounting plate.
•
Use a Philips Head screwdriver to tighten the safety bolts into the bottom of
the Centurion so that it attaches itself to the bottom of the mounting plate.
This will further secure the unit to the wall.
5 YEAR
WARRANTY
