13
OPERATION (cont.)
6.
You can adjust temperature you want by pressing the “ ” and
“ ” button to increase or decrease the temperature setting.
It starts to heat when the environment temperature below 2° than
the setting temperature. It will stop heating as soon as reach the
setting temperature. The setting temperature range is 5-37°.
7.
Pressing “ ” button to get heat directly. One time pressing is in
1000W setting, two time pressing is 1300W setting, three time
pressing is 2300W, and four time pressing is Prevent Frost setting.
Prevent frost:
After choose this mode, icon is lighted,
environment temperature is 5°.
When the environment
≤
3°,1000W and 1300W heating elements
work at the same time,“2300W” icon light.
When the environment
≥
6°, thermal fuse stop heating, icon crush
out, only prevent frost icon light.
8.
By pressing “ ”, you can set the timer from 1-24 hours.
9.
By pressing “ ”, will turn on Turbo mode, which activates
the fan, the fan icon will be lighted on the screen when the fan is
working. Only under 1000W/1300/2300W mode, could open or
close the fan. Under other mode, cannot use fan. Switch to other
work condition, the fan will automatically shut off.
10.
By pressing “ ”, display temperature and setting temperature
could be switched between Fahrenheit and Celcius.
