Manual AiR-force SLR_2 version_1.0_engl.
Page 3
state of the art bike technology
®
The mounting area of the shock absorber should have a minimum width of 12 mm.
Picture 1.2
shows the sequence of mounting hardware. Please use only the standard mounting
hardware from the shock. You need the bushing four times and the seals 13x1 two times. Fit
together as shown. Please put the seals (black rings) only to the rear eyelet (it’s smaller). The
oil chamber eyelet will be fit without seals.
Bushings (4 pcs)
NOTE!
Seals (2 pcs 13x1) (black rings)
See to the red arrows!
Picture 1.1
Picture 1.2
