German pool WAC-407R, User Manual

Page: 10 / 32

P.10
Operating Instructions
Automatic mode.
To activate the FEEL (automatic) mode of operation,
press the MODE button on the remote control until
the pointer points to FEEL.
In the FEEL mode the fan speed and the temperature
are set automatically according to the room tempera-
ture (tested by the probe which is incorporated in the
indoor unit)to ensure user comfort.
Ambient temp
Auto temp
20
23
23 26
20 ~ 26
Op
FAN(FOR COOL ONLY TYPE)
eration mode
DRY
COOL
18
To optimize the working of the conditioner , adjust
the temperature(only 2 )(1), the speed (2) and
the direction of the air flow (3) by pressing the
buttons indicated.
To activate the SLEEP mode of operation, press the
the SLEEP button on the remote control until the
the pointer points to SLEEP.
FEEL MODE
SLEEP MODE
SLEEP
FEEL
1
2
3
1
2
3
Use the Sleep mode during cooling condition.
Temperature becomes ST-1 after an hour, ST-2 after
another hour, and ST-3 after another hour. This
temperature is maintained for the next two hours,
after which the temperature becomes ST-2, and then
ST an hour after that. This temperature will be
maintained throughout; the air conditioner does not
switch off after 10 hours.