German pool SlimTower EFB-P20H, User Manual

Page: 5 / 15

P.9 P.8
Operating Instructions
Remote Control
1. Cool Mode
2. Oscillating
3. ON/OFF
4. Increase Volume
5. Decrease Volume
6. Warm Mode 7. Turbo Mode
8. Timer
9. Sleep Mode
10. Raise Temperature
11. Sound Button
12. Reduce temperature
Operating Instructions
On/Off
The device can be switched on and off by pressing the “ON/OFF” button
Sleep Mode
Press Sleep Mode button on the Remote Control.
The display shows LL and the wind speed becomes lowest.
Press again to exit the Sleep Mode.
(You can also exit the current mode by pressing the Wind St button.)
High Cool
Press Turbo Mode button on the Remote Control.
The display shows HH and the wind speed become highest.
Press again to exit the Turbo Mode.
(You can also exit the current mode by pressing the Wind St button.)
Oscillating
Press the Oscillation button to turn on the Oscillation Function. This fan can swing
left and right 80°. Press this button again to stop oscillating.
Sound
Press Sound button to turn on/off sound of product. The product will make a short
beeping sound.
Cool Mode
Press this button to activate the Cool Mode.
Note: The default starting mode is Cool Mode.
Increase /
Decrease
Air Volume
Press the ‘+’ button on the left side of the Remote Control to increase airflow;
press the “-” button on the left side of the Remote Control to decrease the airflow.
There are 9-level settings for Cool Mode, and 4 levels for Warm Mode.
Warm Mode
Press this button to activate the Warm Mode.
Note: In Warm Mode there is no Turbo Mode or Sleep Mode.
Raise /
Reduce
Tempera-
ture
In Warm Mode, press the temperature button on the right side of the Remote
Control to set the temperature (1-30°C).
Note: this button does not work in Cool Mode.
Timer
Press the Timer button on the Remote Control to set 1 to 8 hours of timing.
1 6
7
8
9
10
11
12
2
4
5
3
Attention!
When using the Remote Control, please make sure to point it directly at the LED Display on the Control
Panel for best signal reception.