German pool REF-365, User Manual, Page: 7 / 21

P.13 P.12
1. The dimensions of the cabinet must correspond to those specified figures in the
diagram.
2. Push the refrigerator into
the cabinet and adjust it to
make sure the edge fold of
top baffle completely touch
the top edge of the cabinet,
and the limit hook of
supporting leg completely
touch the bottom edge of
the cabinet.
3. Fix the supporting leg with
screws and then install
the screw caps.
Installation
Built-in Installation
Steps
WARNING!
• Do not install it near to sources of heat such as heaters, radiators, cookers, etc. Avoid
direct sunlight.
• After the appliance has been placed in its final position, leave it for about an hour before
connecting the power supply.
• Make sure the appliance is working properly before placing any food in it.
• Run the refrigerator for 2-3 hours in winter or at least 4 hours in the summer before placing
any food in it.
Limit Hook
Edgefold Top Baffle
Screw Cap
Screw
4. Fix the top baffle to the
top of the cabinet inner
with screws and then
install the screw caps.
Installation
7. Take out the sealing strip
from accessory bag, and
press it in the gap between
the cabinet and the
refrigerator. Installation is
completed.
5. Open the lower door of cabinet
the maximumangle, and open
the lower door of the refrigerator
to the corresponding position.
Sliding the block to make sure
inner edge align with the lower
door edge of refrigerator, then
fix the block to the door of
cabinet with screw and install
screw caps.
6. Fix the upper refrigerator door to the cabinet door in the same way.
Screw
Screw Cap
Block