German pool PAC-215, User Manual

Page: 10 / 27

P.19 P.18
DRY mode
Ideal to reduce room humidity (spring and autumn, damp rooms, rainy
periods, etc).
In dry mode, the appliance should be prepared in the same way as cool
mode, with the air exhaust hose attached to enable the moisture to be
discharged outside.
To set this mode correctly:
• Press the button a number of times until the symbol appears.
• Select the required fan speed by pressing the button.
Three speeds are available:
Maximum speed: to achieve the best dehumidifying effect.
Medium speed: can reduce noise levels but still maintains a better dehumidify effect.
Low speed: for silent operation but lowers the dehumidifying effect relatively.
SWING function
This function is useful for select the up/down swing of air Delivery.
To set this function correctly:
• Select the operating mode (cool, heat, dry, fan) as described above.
• Press the button several times, the deflector will stop at different positions or swing continuously.
Swing
The deflector position
SLEEP mode function
This function is useful for the night as it gradually reduces operation of the appliance.
To set this function correctly:
• Select the cool or heat mode as described above.
Press the button. The appliance operates in the previously selected mode.
• When you choose the sleep function, the screen will be dimmed .
The SLEEP function maintains the room at optimum temperature without excessive fluctuations in
either temperature or humidity with silent operation.
Fan speed is always at Low, while room temperature and humidity vary gradually to ensure optimum
comfort.
When in COOL mode, the selected temperature will increase by 1°C(1°F) per hour in a 2 hour period.
This new temperature will be maintained for the next 6 hours before the appliance shuts off.
When in HEAT mode, the selected temperature will decrease by 1°C(1°F) per hour in a 3 hour period.
This new temperature will be maintained for the next 5 hours before the appliance shuts off.
The SLEEP function can be canceled at any time during operation by pressing the “Sleep”, “Mode” or
“Fan Speed” button.
In FAN or DRY mode, SLEEP mode function cannot be set.
Switch the unit of temperature
When the appliance is in standby mode, press the °C/°F button, then you can change the unit of
temperature.
For example:
Before change, in cool mode, the screen display looks like fig9.
After change, in cool mode, the screen display looks like fig10.
Fig 9 Fig 10
Operating Instructions Operating Instructions
Note: Under dry mode the temperature cannot be adjusted, only wind speed can be adjusted.
Note: When indoor temperature is ≤16°C, compressor unit will not activate and dry mode will not be
available.