P.7
P.6
Operation Instructions
Before Initial Use
It is recommended that you do the following steps to clean your kettle when using the kettle for the first
time:
1. Boil a full kettle of water (fill to the MAX mark).
2. Pour away the water.
3. Repeat the above procedure twice.
Operation Procedure
1. Remove the glass kettle from the power base and open the lid by pressing the Lid Lock Release
Button, fill with the desired amount of water and close the lid.
NOTE:
•
Always fill the kettle between the minimum (0.5L) and maximum (1.7L) marks.
•
Boiling water below the minimum mark can lead to the kettle drying out.
•
Boiling water above the maximum mark can lead to boiling water spraying out from the spout.
•
Make sure the lid is completely closed before connecting the power cord to the outlet.
2. Place the glass kettle properly onto the power base, then connect the power cord to the outlet.
3. Turn on the switch, the indicator light lights up and water will start to boil. When water reaches
boiling point, the kettle will automatically turn off power, and indicator light turns off.
NOTE:
Ensure that the switch is clear of obstructions and the lid is firmly closed. The kettle will not turn off if
the switch is constrained or if the lid is left open.
4. Lift the kettle from the power base and carefully pour the water into your cup or other containers.
WARNING!
Be careful when pouring the water from your kettle as boiling water may result in scalds, and DO NOT
open the lid while the water in the kettle is still hot.
5. The kettle can be placed on the power base when not in use, but MUST cut off the power supply.
If the kettle is accidentally turned on when there is no water it, the Boil-Dry Protection function
will activate and automatically turn off the kettle. Should this occur, user MUST allow the kettle to
cool down before re-filling it with water.
WARNING!
Disconnect the product from the power source and let the kettle cool down completely before
cleaning. DO NOT clean the kettle and the base with water and do not immerse them in water to
avoid electrical shock.
•
Clean the product with a slightly damp lint-free cloth. DO NOT use toxic cleansers to clean the
product.
•
DO NOT use chemical, metal, wooden or abrasive materials to clean the product.
•
Take out the filter and clean with a damp soft cloth regularly. To take out the filter, pull it upwards
and outwards. Reinsert properly after cleaning.
Descaling
Tap water or water that is not distilled may cause lime deposits to build up on the bottom of the glass
kettle. Please use descaling agent and neutral cleansers to clean the kettle:
1. Fill the kettle with vinegar and water, and let it soak overnight.
2. Pour out the water, and wipe with a damp cloth.
3. Pour clean water into the kettle, let to boil then discard the water. Repeat this procedure one more
time, then the kettle is ready for use.
Cleaning and Maintenance
Be Environmentally Responsible!
Please remember to respect your local regulations, and recycle non-working electrical
equipments to an appropriate waste disposal center.
