German pool IRC-501, User Manual

Page: 37 / 40

P.37
Troubleshooting
Problem Cause(s) Solution
Difficulty closing cover
Difficulty opening
cover
Air leak from the cover
Air leak from the
Float valve
The Float valve
doesn’t rise
Too much air coming
from the pressure-
limit valve
E0 shown on screen
E1 shown on screen
E2 shown on screen
E3 shown on screen
E4 shown on screen
E5 shown on screen
E6 shown on screen
E7 shown on screen
Seal ring is not preperly in place
Float valve stuck
Float valve doesn't fall down
Seal ring not in place
Food remains on Seal ring
Broken Seal ring
Cover cannot close properly
Food remains on the Float valve or Seal ring
Wear on Float valve or Seal ring
Not enough food or water
Air leakage from cover or Float Valve
Float valve not placed properly or rod is stuck
Over the pressure limit
Opening switch cannot be turned to “Close”
position
Circuit of bottom sensor open
Circuit of bottom sensor short out
Inner temperature is too high
Circuit of top sensor open
Circuit of top sensor short out
Low temperature and air pressure detected
Inner temperature too high, Float valve can't rise
Put the Seal ring in right position
Lightly push float valve rod
Open the steam safety valve,
gently press the black button with
chopstick
Make sure Seal ring is in place
Clean Seal ring
Replace Seal ring
Follow manual instructions to close
the cover
Clean the Float valve and Seal ring
Replace Float valve and Seal ring
Add more food or water
Contact customer service
Clean float valve and put it back
properly
Contact customer service
Turn the opening switch to "Close"
position
Contact customer service
Contact customer service
Allow the inner temperature to cool
down
Contact customer service
Contact customer service
Contact customer service
Contact customer service