German pool HTB-248U, User Manual, Page: 11 / 32

P.11
Warm Function
• Press “WARM ” button to start with a Warm mode for operation and indication light gets on. You
can choose “High Speed ” or “Low Speed “ air volume by using the “SPEED” button.
• Timer: The default time is 2 hours. You can select the time duration by pressing the “+” or “-”
of the “TIMER” button, the time can be set form 1 hour to 24 hours. The remaining time will be
showed on the LED display. The time selection will be recorded in memory when the machine is
off, and will resume in your next usage.
• Stop: Press the “STOP ” button or when pre-set time is over, “WARM ” indication light gets
off, the remaining time display will also be off, and the machine stops automatically. When the
heater stops running, the fan will continuously run for about 25 seconds to cool down the PTC
electric heater.
Preheat Function
• Press “PREHEAT ” button, the “WARM ” indication lights gets on, air volume runs at “High
Speed ” mode. The rest of the operation please refer to “WARM ” function.
• Swing angle is set at the widest in this function, and cannot be adjusted.
Functions
Instruction of Remote Control Button
Dry Warm
Preheat 15 Minutes Delay Off
Ventilation
24 Hours Ventilation
Speed
Timer
Stop
UVC
Fan
Circulation
Anion
Swing
Auto