P.9
P.8
Warm Function
•
Press “WARM
” button to start with a Warm mode for operation and indication light gets on. You
can choose “High speed
” or “Low speed “ air volume by using the “SPEED” button.
•
Timer: The default time is 2 hours. You can select the time duration by pressing the “+” or “-” of
the “TIMER
” button, the time can be set form 1 hour to 24 hours. The remaining time will be
showed on the LED display. The time selection will be recorded in memory when the machine is
off, and will resume in your next usage.
•
Stop: Press the “STOP
” button or when pre-set time is over, “WARM ” LED light gets off, the
remaining time display will also be off, and the machine stops automatically. When the heater
stops running, the fan will continuously run for about 25 seconds to cool down the PTC electric
heater.
Preheat Function
•
Press “PREHEAT
” button, the “PREHEAT
” indication lights gets on, air volume runs at “High
Speed “ mode.
•
The rest of the operation please refer to “WARM
” function.
Functions
Installation
Instruction of Remote Control Button
Window Type Installation
Front cover size: 254mm*254mm
Window frame size: 215mm*209mm
*Window type installation must be transverse installation.
1. Install at the place of the aluminum framed window or replace the exhaust fan in the bathroom.
2. Fix the waterproof casing to the frame of the aluminum window. (waterproof glue must be used for
waterproof)
3. After connecting the power cord, embed the main body into the hole with screws.
Packaging Accessories List
Purpose
Fix the Remote Control
Fix the Body
Product Description
Screw
Screw
Plastic plug
Specifications
ST3.9*25,
φ7 pan head screw
ST4.2*25, φ7pan
head screw
Ø6*28
Quantity
2
4
2
Main Body
Nail fixed hole
Main body fixed screw
Front cover
Wall
Aluminum window
Main Body
Front cover
Aluminum window
About 2.3 meters
off the ground
Fan
Circulation
Dry
Warm
Preheat
15 Minutes Delay Off
Ventilation
24 Hours Ventilation
Speed
Stop
Timer
Anion
Swing
Auto
Watch the video clip
NOTICE:
This product is suitable for
window installation. For wall or ceiling
installation, an additional air outlet fitting
needs to be purchased separately.