31
Fig. 10.3
MODELS WITH WIRE RACKS
• Assemble the wire racks to the oven walls using the 2 screws (Fig. 10.2).
In the models with catalytic panels interpose the catalytic panels “A” with the arrow
up (Fig. 10.2).
Models with side lamp: The catalytic panel with the hole for the side oven lamp
must be positioned on the left oven wall. DO NOT INTERPOSE THE CATALYTIC
PANEL WITHOUT THE HOLE ON THE LEFT OVEN WALL.
• Slide in, on the guides, the shelf and the tray (fig. 10.3).
The shelf must be fitted so that the safety catch, which stops it sliding out, faces
the inside of the oven.
• To dismantle, operate in reverse order.
Fig. 10.1
MODELS WITH EMBOSSED CAVITY
The oven shelves are provided with a
security block to prevent accidental
extraction.
They must be inserted operating as per
figure 10.1.
To pull them out operate in the inverse
order.
OVEN FITTING OUT
Fig. 10.2
A
A
HOLE FOR SIDE LIGHT
(SOME MODELS ONLY)
