German pool FST-D7, Operating Instructions Manual

Page: 9 / 24

Operating Instructions
P.9
4. When the cooking time is over, the appliance will stop cooking and “Co” will appear on the LCD display.
5. Remove the Drip Tray with a mitt or dry cloth after it cools down completely.
6. When there is not enough water in the tank, the symbol “Ad” will appear on the LCD display, and the appliance
will stop its operation. To resume operation, fill water tank within 3 minutes. Otherwise, “Er” will appear until
you press and hold for 2 seconds. Alternatively, unplug and re-plug the power to bring the appliance back
to “Stand-by” mode.
For FST-K8
1. Set cooking time by turning the Bell Timer knob to desired time marking (refer to Cooking Time Reference Guide).
2. When the Working Indicator lights up, the appliance starts to operate.
3. When the cooking time is over, the Working Indicator will go out, and the timer will give a ring. The appliance will
stop cooking, but the Power Indicator light is still on until the appliance is unplugged.
4. Remove the Drip Tray with a mitt or dry cloth after it cools down completely.
C. Basket Combinations
One steaming basket:
Use one steaming basket to cook one type of food (e.g. peeled potatoes). Distribute food sparsely to avoid
blocking up the holes at the bottom of the basket.
Two steaming baskets:
Food with larger quantities and/or requiring longer cooking time should be cooked in the lower basket. Soup and
sauces will drip from the upper basket, make sure they do not affect the flavors of food in the lower basket.
Three steaming baskets:
To cook different kinds of food at the same time, always place the largest pieces of food requiring the longest
cooking time in the bottom basket. The top basket takes a longer time to reach the cooking temperature (normally
about 3-5 minutes longer).
When you cook beef/fish/poultry and vegetables together, always put the meat in the lower baskets. This way the
raw or half-cooked meat juice would not drip to other food.
Note
The timer operates regardless of whether the unit is plugged into the electrical outlet or not. Make sure the indicator light
is on when setting the timer.