P.9
P.8
Built-In Oven EVC-282
WARNING!
•
All electrical work must only be carried out by a qualified and authorized electrician. DO NOT make
any alterations to the electricity supply.
•
Remember to connect the safety circuit to the connection box terminal marked with . The
electricity supply for the oven must have a safety switch which enables the power to be cut off in
case of emergency. The distance between the working contacts of the safety switch must be at
least 3 mm.
•
Before connecting the oven to the power supply, it is important to read the information on the
rating plate and the connection diagram.
1.
The oven is manufactured to work with one-phase alternating current (220V-240V/50-60Hz).
The connection diagram is also found on the cover of the connection box. Remember that the
connection wire should match the connection type and the power rating of the oven.
2. The connection cable must be secured with a strain-relief clamp.
WARNING!
•
Voltage of heating elements 220V~240V.
•
In the event of any connection, the safety wire must be connected to the PE terminal.
•
For 220V~240V earthed one-phase connection: Connect L (brown wire) to 3, connect N (blue
wire) to 5, and connect safety wire (yellow-green) to PE terminal.
1
2
Installation Instructions
Product Structure
Grease collecting tray
Grill rack
Electrical Connection
LED display panel
Control keys
Temperature knob
Oven door handle
Function knob
