P.9
P.8
Operating Instructions
Before using the fan make sure that it is on a flat and stable surface.
Damage may occur if it is placed on an incline or decline.
Set all the switches to OFF position, then insert the plug directly into a standard AC
socket-outlet. Be sure plug fits tightly into outlet.
Speed / On / Off
Pressing the Speed button for the first time, the fan will switch on. Then press the Speed button, 5 wind
speeds can be chosen.
The Speed button is shared with the on/off button. Long pressing the On/Off button three seconds, the
fan will switch off.
Timer
Pressing the timer button, the timer function can be set to longest 7 hours at 1 hour intervals. LED
light can shows working and timer status at 1h, 2h and 4h.
Mode
Default startup mode is normal mode. After pressing the Mode button, that has three mode can be
chosen: normal mode, natural mode, sleep mode.
Normal Mode: The default mode for the fan.
Natural Mode: The wind can imitate natural wind.
Sleep Mode : The wind is gentle to accommodate sleeping.
Swing
After pressing the Swing button, the fan can automatically oscillate left & right.
Watch the video clip
Operating Instructions
Lift Button
The height of the fan can be adjusted. To raise or lower the body frame, simply press the lift button
and adjust to your preferred height.
Remote Control
•
Control distance is approximately 3 meters.
•
Light mode: Press the button will close the light on the control panel.
•
Mute mode: Press the button to mute the fan.
•
The remote control Power button is labeled accordingly. All the functions per-
formed with the remote control function identically to the Manual Controls.
•
Please clamp the remote control frame on the center post before use.
•
Each function can be adjusted by using the remote control. The functions are
adjusted with the base control panel.
•
Before using the remote control, remove the battery protection sticker. To re-
move the sticker secure the battery cover with finger then pull tab. (Figure 1).
•
When the battery has been consumed, please update the battery.
After removing the battery cover, remove the battery. Please use the battery CR2025, ensure the
battery is lined up to the correct side, the positive pole of the battery and the battery cover are
marked with the same direction as “
”(Figure 2).
•
Please turn the remote control transmitter to the control panel receiver, and then perform the
button operation (Figure 3). The maximum remote control distance is about 3 meters, there is no
obstacle between the remote control and the body, otherwise it will affect the operation.
•
When the remote control is not in use, it is recommended to place the remote control in the
remote control frame (Figure 4).
MUTE
MODE
SWING
ON/OFF
LIGHT
TIMER
SPEED
MODE
TIMER
SWING
SPEED
ON/OFF
Sleep
Natural
Normal
4h
2h
1h
Figure 1
Figure 3
Figure 2
Figure 4
MODE
TIMER
SWING
SPEED
ON/OFF
Sleep
Natural
Normal
4
h
2
h
1
h
MUTE
MODE
SWING
ON/OFF
LIGHT
TIMER
SPEED
