P.8
P.9
Operation Instructions
Air Duct Angle Setting
Before adjusting the air duct angle, make sure the product is turned off. Hold product
body with one hand and set the air duct 15° forward or backward.
Switch ON and OFF
1. Connect to power source, and product will enter into Standby Mode.
2. Press On/Off
, the buzzer will beep once, and product will start to operate.
3. To turn off the product, long-press 2 seconds, the buzzer will beep twice, and
product will stop operating.
Operation Instructions
LED Display Panel
Filter Replacement
Alert Indicator
Plasma Purification
Indicator
UVC Disinfection
Indicator
Wind Speed/
Timer Indicator
ICON
DESCRIPTION
On/Off Button
• Press to turn product on.
• Press repeatedly to adjust air volume.
• Long-press 1 second to turn Oscillation on and off.
• Long-press 2 seconds to turn off product.
Filter Replacement Alert Indicator
After a total of 720 hours of operation, will light up, indicating the
filter needs to be replaced. After the filter has been replaced, long-press
on the Remote Control for 5 seconds, will turn off, and product will
enter a new 720 hour cycle.
UVC Disinfection Indicator
When UVC Disinfection Function is turned on via the Remote Control,
will light up. UVC will automatically turn off after 1 hour.
Plasma Purification Indicator
When Plasma Purification Function is turned on via the Remote Control,
will light up.
Wind Speed / Timer Display
This indicates the current wind speed or timer.
