German pool DHM-706S, User Manual

Page: 7 / 17

P.12 P.13
Operation Instructions
Dry Mode
For drying laundry. The compressor works continuously; by default, the fan speed is set
to High and is not adjustable. Display shows ambient humidity (30-90%RH*) and the
humidity level cannot be set.
Operation Instructions
C. Draining Instructions
When the water tank is full, the product will turn off automatically and all buttons
become invalid. The buzzer will beep 5 times,
indicator lights up and “FL” flashes on
the Display Panel to alert user to empty the water tank.
Gently hold onto the hollow at the bottom of the tank and pull out the tank. Drain the
water and insert the tank back to the right place before restarting the product.
Note:
After switching off the product, the product will run for another 1 minute (in all
modes except Fan Mode) to dissipate residual humidity inside, after which it will
turn off automatically.
*RH means Relative Humidity
Note:
Dry Mode facilitates the drying of laundry by lowering ambient humidity level,
not directly drying laundry with dry heat.
At all times, DO NOT cover the product’s air outlet, and DO NOT hang wet
laundry on top of the product to avoid water dripping into and damaging the
product.
When drying laundry, please close all windows and doors to facilitate the
drying process.
Timer Function
a) Countdown to Switch On: When the product is in standby status, press
and
set time from 0 hour to 24 hours by pressing and . Timer will start to
countdown, once the set time arrives, the product will turn on automatically.
b) Countdown to Switching Off: While the product is running, press
and set
time from 0 hour to 24 hours by pressing and Buttons. Timer will start to
countdown; once the set time arrives, the product will turn off automatically.
Auto Mode
By default, Auto Mode humidity level is set at 50% and is not adjustable. Display Panel
shows ambient humidity (30-90%RH*).
a) When ambient humidity ≥70%, the product will work in Dehumidify Mode at high
fan speed, and the fan speed is not adjustable.
b) When ambient humidity is between 50%-70%, the product will work in Dehumidify
Mode at low fan speed, and the fan speed is not adjustable.
c) When ambient humidity is <50%, the product will work in Fan Mode, and the fan
speed is not adjustable.
B. Advanced Operation
UV & Anion Function
Long-press 3 seconds to turn UV Disinfection & Anion Purification Function on or off.
c) When Timer Function is activated, press
to check the setting info. To cancel
Timer, press again while the digital display is blinking.
Child Lock Function
Press and simultaneously to activate Child Lock. indicator lights up and all
button operations become invalid; press and simultaneously again to deactivate
the Child Lock.