P.19
P.18
Control Panel
Control Buttons
Digital Screen
Start/Cancel
Time/Temperature
Switch
Select / Adjust
Button
Select / Adjust
Button
Function Button
Spin Button
Base
Lid Supporting
Column
Halogen Heating
Element
Rotary Rack
Glass Container
Fan Speed Knob
Product Structure
Unit Body
Control Panel
Operating Instructions
Attention
•
A slight scent of smoke may be detected during its initial application. The release of smell is a
normal phenomenon and it will disappear gradually.
•
Prior to using the machine, read all the instructions and warning labels on the product.
•
The glass container should be properly installed before switching on the appliance.
Basic Operation
Start up:
Switch on the appliance, the buzzer emits a “BI” sound and the digital screen lights
up. The machine is in power-saving mode. Press any button to enter standby mode
(the whole menu lights up and the dash in the middle of panel glows).
Start/Cancel:
On standby mode, select the desired default menu, press “Start/Cancel” button to start cooking, press
“Start/Cancel” button to stop cooking and return to standby mode.
Function:
On standby mode, press “Function” or “+” “-” to buttons to select a menu. The indicator of the selected
menu will flash.
Spin:
1.
On working mode, press “Spin” button to stop spinning and press it again to resume spinning.
2.
On standby mode, press “Spin” button to start spinning and press it again to stop spinning.
Time/Temperature:
1.
On standby mode or menu setting mode, press this button to enter time adjustment interface
with its corresponding value flashing. Press this button again to enter temperature adjustment
interface with its corresponding value flashing. Time and temperature can be adjusted in turns.
2.
On working mode, press this button to enter time adjustment interface with its corresponding
value flashing. Press this button again to enter temperature adjustment interface with its
corresponding value flashing. After setting the time/temperature, the machine flashes 5 times.
Then the machine starts working and the timer starts counting down.
Watch the video clip
