German pool CKY-988, Operating Instructions Manual

Page: 17 / 24

P.17
Product Structure
Control Panel
Heat Circulating System
12L Glass Container
Base Stand
Function Indicators
Function Button
Time Button
Speed Button
Halogen Heating Element
Unit Body
Temperature Display
Temp Button
Temperature / Time
Adjustment Button
Temperature / Time
Adjustment Button
Time Display
Spin Button
Start / Cancel Button
Lid Lock Protection
Button
( Please refer to P.13)
Control Panel
START/CANCEL FUNCTION
SPIN SPEED
TEMP TIME
時 間
風 速 旋 轉
功 能 開 始 / 取 消
温 度
Toast
翻脆
Rice
煲仔飯
Operating Instructions
Attention
Operating Procedures
As a safety measure, when the lid is open, heating element and fans will be switched off. When it is placed
down, the unit will continue its operation.
If a cookware is to be used inside glass container, use one that is made of metal and place it on a rack to
ensure that food is evenly cooked. There should be a distance of at least 3 cm between the food and the lid.
Do not touch the glass container during operation. Keep children away from the unit to prevent injuries.
Cooking temperature and time can be adjusted during operation.
On a flat and level surface, attach glass container to plastic base stand and remove the rubber hole plug.
Install the rotary rack at the centre of the glass container and fix its position by turning it to the left. Select
appropriate rack and accessories based on food type and style of cooking. Position rack in glass container
and place food items on top.
Secure pot cover and connect with power. The control panel will light up and the appliance will enter
stand-by mode. Time and temperature on the LCD display screen will be shown as 0:00.
Set cooking time and temperature using one of the following methods:
a. Adjust time (1-119 min) and temperature (50-250°C) by pressing “+” and “-“buttons.
b. Press to select an auto function (see P.18-19).
User can make further adjustment using the “+” and “-“ buttons.
Note: One of the function indicators will blink as soon as a function is selected;
however, cooking pot will not start its operation until is pressed.
Press button to start operation.
Heating element may go off before set time is up. It means that the desired temperature is reached.
Cooking pot would temporarily stop adding heat. However, the heat circulating system would keep on
running until time is completely over.
When time is over (“0:00”), cooking pot will beep several times. Unplug power and lift up cooking pot lid.
- Pause Cooking: Before set time is up, user can pause operation by simply lifting up the pot lid
and resume cooking by closing it.
- Shut Down: To end cooking pot’s operation before time is up, press and then lift up pot lid.
Time and temperature settings will be erased.
1.
2.
3.
4.
5.
6.
7.
Take food or plate out of glass container using the supplied plate lifter. 8.
P.17