2
1. UNPACKING YOUR LOUDSPEAKERS
NOTE:
To allow the packing to be lifted off the loudspeakers, ensure that
the room where the loudspeakers are to be unpacked has at least
135cm of clearance between the top of the carton and the ceiling.
When lifting the loudspeakers out of the packing hold them
around the cabinet. Do not lift them by the DDD driver support
pillars (figure 3) as this may damage the DDD driver.
The DDD drivers may be protected with clear film or cardboard
covers. We recommend that these be left in place until the
loudspeakers have been placed in their final location so as to
guard against accidental damage during handling.
The Unicorn Mk II weighs approximately 56kg (123lbs) and should
not be lifted be one person alone. Always have help when lifting a
Unicorn Mk II.
Each Unicorn Mk II is supplied in an individual shipping carton. Both external networks are packed
together in a third carton. The Unicorn Mk II cartons must be kept upright as shown in figure 1. Before
opening the cartons, please inspect them for damage. If you see any damage, please contact the
supplying audio dealer immediately and provide them with a full description of the damage. Do not
attempt to unpack the cartons until you have spoken with the dealer and have been advised how to
proceed.
To unpack the loudspeakers please follow the instructions below:
1. Remove the top of the carton – item A in figure 1.
2. Remove the foam packing piece from the top of the main body of the carton - item B in figure 1.
3. Lift off the main body of the carton – item B in figure 1. Make sure that you have sufficient clearance
between the top of the carton and the ceiling above.
Figure 1. Unicorn Mk II Shipping Carton
A
B
