GLP
German Light Products GmbH
(Instruction version 1.97) / from software version 1.61
26
3.1.3 Changing the effect wheel
1) Open the fixture.
2) Release the mechanical stop of the effect and move it up.
3) The Effect wheel can now be tilt out by hand.
4) The wheel itself is clipped on the wheel axis.
5) To remove it please use a slotted screwdriver and lift it out carefully
from the wheel axis of the effect wheel.
6) Attention: Don't pull the effect wheel out by grapping it with the
hands at the border!
7) Change Effect wheel as desired and close the module in reverse
order again.
