Gericom Q10 Air, User Manual

Page: 9 / 62

USER’S MANUAL ENGLISH
5
following information explains the requirements for
power cord set selection.

The cord set must be approved for the country in
which it is used.

The appliance coupler must have a configuration
for mating with a CEE7/EN60320/IEC 320/NEMA/
JIS C 8303 appliance inlet.
A. For U.S. and Canada:

The cord set must be UL Listed and CSA
Certified.

The minimum specifications for the flexible cord
are No. 18 AWG, (2) Type SPT-2, and (3) 2-
conductor.
B. For Japan:
 All components of the cord set must bear a PSE
mark in accordance with the Japanese DENAN
Law.
 The minimum specifications for the flexible cord
are .75mm² conductors, (2) Type VCTR or VCTFK,
and (3) 2-conductor.

The cord set must have minimum rated current
capacity of 7 A.

The attachment plug must be a two-pole,
grounded type with a Japanese Industrial
Standard C8303 (15A, 125 VAC) configuration.
C. For other countries:
 The cord set fittings must bear the certification
mark of the agency responsible for evaluation in
a specific country.
 The flexible cord must be of a HAR (harmonized)
type H03VVH2-F.
 The cord set must have a current capacity of a
least 2.5 Amperes and voltage rating of 125 or
250 VAC.