2. Prepare the connection cable
Connect the plotter to the computer using the USB cable.
3. Prepare the power source
Note: Remove all transportation tape.
1
Locate the power cord connection and power switch on the left side of the printer.
2
Plug the power cord into the plotter but do NOT connect it to the power source until
instructed to do so during installation.
4. Install the plotter driver
There are two sets of instructions for installing the plotter driver – Windows XP® or Windows
Vista®. Follow the instructions that pertain to your computer’s operating system.
Windows XP
1
Insert the Gerber Tempo 600 CD into the computer drive.
2
Browse the CD to locate MultiSetup.exe and double click it to open the installation
program.
3
Click the
Install Tempo 600 USB Driver
button.
4
The screen displays the following message. Make sure the Tempo 600 is NOT
connected to the power outlet.
3 of 15