geratech EGE-MSI-16x16, Manual, Page: 10 / 21

www.geratech.com.tr
geratech ®
EGE-MSI-16x16 Modüler Matrix
8
HPDL x Pull the input(x:01~16) Hot-Plug-Detect
signal to 'LOW'.
HPDH x Pull the input(x:01~16) Hot-Plug-Detect
signal to 'HIGH'.
HPDLALL Set all input HPD to Low.
HPDHALL Set all input HPD to High.
HPDSTATUS Report all input Hot-Plug-Detect signal
status.
EDIDMODE x y Set EDID mode(y:1~2) to Input(x:
01~16).
EDIDMODEALL x The EDID mode(x:1~2) of All Input.
EDIDPORT x y Set EDID Assigned Port(y:01~16) to
Input(x:01~16).
EDIDPORTALL x The EDID of All Inports is assigned to
Output (x:01-16).
EDIDSTATUS Report all input EDID mode&port.
UART x "str" Write UART string to output
port(x:01~16).
UARTBAUD x y Setting output port(x:01~16) UART
baud rate(y).
STATUSUART Show output port UART baud rate.
TEMPSTATUS Show temperature sensor values y1, y2.
SETIPADDR Setting IP address<x.x.x.x>.
SETSNMASK Setting subnet mask<x.x.x.x>.
SETGWADDR Setting gateway IP address<x.x.x.x>.
IPCONFIG
RSTIP
Defaults(DHCP).
BUZZER x Buzzer Mute(0),UnMute(1).
REBOOT System reboot.
SAVETO x Save as Preset x(1~10).
RECALLTO x Recall Preset x(1~10).