geratech EGE-MSI-16416, Manual, Page: 13 / 26

EGE-MSI-16416
1 6 x 1 6 M o d u l a r i z e d E n c l o s u r e
( 4 8 2 m m × 4 8 4 m m × 1 4 5 m m )
EGE-MSI-16416
1 6 x 1 6 M o d u l a r i z e d E n c l o s u r e
( 4 8 2 m m × 4 8 4 m m × 1 4 5 m m )
8
COMMAND DESCRIPTION
EDIDSTATUS Report the status of the EDID modes of all
inputs
IRMASKOUT x y z* Disable/enable (z=0/1) IR transmission from
the IR input on the specified HDBaseT Output
Module’s port (y=1~16/all) to the currently
routed HDBaseT Transmitter (x=src) or Receiver
(x=sink)
Example 1: “IRMASKOUT src 7 0” disables
IR transmissions from the HDBaseT Output
Module’s IR In port #7 to the currently routed
HDBaseT Transmitter’s IR Out.
Example 2: “IRMASKOUT sink 5 1” enables
IR transmissions from the HDBaseT Output
Module’s IR In port #5 to the currently routed
HDBaseT Receiver’s IR Out.
IRMASKCPU x y z* Disable/enable (z=0/1) IR transmission from the
IR ALL input on the CPU Control Board to the
HDBaseT Transmitter (x=src), Receiver (x=sink)
or Output Module (x=out) on to the specified
port (y=1~16/all)
Example 1: “IRMASKCPU src all 0” disables IR
transmissions from the CPU Control Board’s
IR ALL In port to all connected HDBaseT
Transmitters’ IR Out.
Example 2: “IRMASKCPU out 5 1” enables IR
transmissions from the CPU Control Board’s IR
ALL In port to the HDBaseT Output Module’s
port #5 IR Out.
SHOWIRMASKOUT x
y* Display the current IR mask setting for the
specified HDBaseT Output Module’s port
(y=1~16/all) to HDBaseT Transmitters (x=src) or
Receivers (x=sink)
SHOWIRMASKCPU x
y* Display the current IR mask setting for the IR
ALL input on the CPU Control Board to the
HDBaseT Transmitter (x=src), Receiver (x=sink)
or Output Module (x=out) on to the specified
port (y=1~16/all)
UART x y "str" Write UART string to output port (x=in/out,
y=1~16, "str"="string")
UARTBAUD x y Set the UART Baud rate of output (x=1~16,
y=rate)
STATUSUART Show the UART Baud rate of output