CONNECTING AND OPERATING
1) Connect the HDMI input source (such as HD-DVD/ PS3 /STB etc.) into transmitter over HDMI cable.
2) Connect the output of transmitter and input of receiver over CAT5E or CAT6 cable.
3) Connect the HDMI oustput (such as: HD-LCD/D-DLP) into receiver over HDMI cable.
4) Connect yhe IR TX cable into ‘‘IRTX’’ port of the transmitter; Connect the IR RX cable into IR RX
3
4
5
HDMI In: Connect to HDMI source device such as Blu-ray pr PS4 player.
IR In: Channel 2 IR Receiver. Connect to an IR receiver cable.
IR Out: Channel 1 IR Transmitter. Connect to an IR emitter cable.
RS-232: Phoenix jack provide serial port control from transmitter to receiver.
Connection Signal Indicator Lamp
• Illuminate: The transmitter and Receiver are in good connections status.
• Flashing: The transmitter and Receiver are in poor connections status.
• Dark: The Transmitter and Receiver are not connected.
Data signal Indicator Lamp
• Illuminate: HDMI signal with HDCP.
• Flashing: HDMI signal without HDCP.
• Dark: No HDMI signal.
5.2 RECEIVER
Power: System power indicator.
DC 24V: Connect 24V / 1A adaptor to AC wall outlet for power supply.
HDBaseT In: Standard HDBaseT input port. Connect HDBaseT Transmitter with a UTP cable
following the standard of direct interconnection method.
HDMI Out: Connect to the HDTV pr monitor HDMI input port.
IR In: Channel 1 IR Receiver. Connect to an IR receiver cable.
IR Out: Channel 2 IR Transmitter. Connect to an IR emitter cable.
RS-232: Phoenix jack provide serial port control signal from transmitter to receiver.
Connection Signal Indicator Lamp
• Illuminate: The transmitter and Receiver are in good connections status.
• Flashing: The transmitter and Receiver are in poor connections status.
• Dark: The Transmitter and Receiver are not connected.
Data signal Indicator Lamp
• Illuminate: HDMI signal with HDCP.
• Flashing: HDMI signal without HDCP.
• Dark: No HDMI signal.
6
7
8
9
6
7
8
9
5
4
1
2
3
EGE-FHD-HDB-EXTL
150m, Full HD-8bit Support, HDBase-T Lite Extender
