September 2010
Manuale Operatore Piegatrice Mondial
3
•
Improper connection of the equipment-grounding conductor can
result in electrical shock.
•
Do not place this equipment where people might step or trip on the
power cord.
•
Do not place objects on the power cord.
•
Do not override or disable electrical or mechanical interlocks.
•
Do not obstruct the ventilation openings.
•
Never push objects of any kind into slots or openings on this
equipment.
•
If any of the following conditions occur, switch off the power to the
machine immediately and disconnect the power cord from the
electrical outlet. Call an authorized local service representative to
correct the problem.
−
The equipment emits an unusual noise or odour.
−
The power cord is damaged or frayed.
−
A wall panel circuit breaker, fuse, or other safety device has
been tripped.
−
Liquid is spilled into the folder.
−
The equipment is exposed to water.
−
Any part of the equipment is damaged.
Disconnect Device
The power cable is the disconnect device for this equipment. It is
attached to the back of the machine as a plug-in device. To remove all
electrical power from the equipment, disconnect the power cable from
the electrical outlet.
Operational Safety Information
To ensure the continued safe operation of your GERA equipment,
follow these safety guidelines at all times.
Do these:
•
Always connect equipment to a correctly grounded power outlet. If in
doubt, have the outlet checked by a qualified electrician.
•
This equipment must be connected to a protective grounded circuit.
This equipment is supplied with a plug that has a protective grounding
pin. This plug will only fit into a grounded electrical outlet. This is a
safety feature. To avoid risk of electric shock, contact your
electrician to replace the electrical outlet if you are unable to insert the
plug into it. Never use a plug that lacks a grounded connection
terminal to connect the product to an electrical outlet.
•
Always follow all warnings and instructions that are marked on or
supplied with the equipment.
•
Always exercise care when moving or relocating equipment. Please
contact your local support organization to arrange relocation of the
product to a location outside your building.
•
Always locate the equipment in an area that has adequate ventilation
and room for servicing. See the Install guide for minimum
dimensions.
•
Always use materials and supplies specifically designed for your
GERA equipment. Use of unsuitable materials may result in poor
performance.
•
Always unplug this equipment from the electrical outlet before
cleaning.
Do not Do these:
•
Never use a plug that lacks a grounded connection terminal to connect
the product to an electrical outlet.
•
Never attempt any maintenance function that is not specifically
described in this documentation.
•
This equipment should not be placed in a built-in installation unless
proper ventilation is provided. Please contact your Authorized Local
Dealer for further information.
