8
/
19
Bind TBS NanoRX:
1.
For Taranis X9D/X9D Plus/X9E and Taranis QX7, turn on the transmitter, go to the TOOLS
–
CROSSFIRE SETUP
–
XF Micro TX ,and select Bind to enter the binding state..
2.
Turn on the receiver while holding the bind button on the receiver, release the button
and the green light on flash .and then holding the button for 8 second ,and release. And
the green light is off and the red light is flashing, ‘update micro RX？’ will appear on the
transmitter screen, and select ‘ENTER’.
3.
Wait for the update to complete, the binding is successful, and the receiver green light is
on.
1
2
3
4
5
6
Bind Button
Binding
Binding Successful
