Gepida Reptila 1100 – Instruction Manual
30
Olimpia Bicycle Ltd. – www.gepida.eu
30
Appendix A: Troubleshooting
Symptom
Advice
The Control Unit would not turn on (After pressing and holding
down the lower-right button).
-
Check if there is a battery pack in the bicycle if so, make sure
the battery pack is locked in the console properly.
-
Check the battery pack is not discharged. If it is, change it to a
recharged one.
Bicycle icon is flashing and the charge level meter is empty on the
Control Unit.
-
No communication detected between the bike and the battery
pack. Take the battery pack out and put it back again.
No assist power experienced. (The bicycle icon is visible and the
charge level meter is not empty).
-
Check the assistance level meter on the Control Unit. If it is
empty, increase the assist level with the right arrow button.
-
Reset the torque sensor. (see at Appendix B)
The assist power becomes insufficient in a low-temperature
environment in winter.
-
If the battery temperature becomes low, a safety function is
activated to prevent the battery from deterioration.