3.
Select the camera on the network and click on Next.
4.
For wired connection or WPS connection, click on Yes and advance to step 6. For wireless connection,
click on No and go to step 5 for further setup.
Page 1: ...connection but does not have WPS function use an Ethernet cable to connect camera to router first When you run myGVcloud CamWizard set camera using wireless connection and then you can unplug the Ethe...
Page 2: ...3 Select the camera on the network and click on Next 4 For wired connection or WPS connection click on Yes and advance to step 6 For wireless connection click on No and go to step 5 for further setup...
Page 3: ...ose DHCP and click on Next 7 Create an account for camera This username password will be needed for future camera setting change Click on Next after completion 8 If you don t have a myGVcloud account...
Page 4: ...rmation will be sent to your inbox If you have wireless connection you may disconnect the Ethernet cable from camera You may now open browser to access the cloud portal at http www mygvcloud com login...
