Connect the camera to power, network and other wires needed.
There are two ways to supply power to the camera:
●
Use a Power over Ethernet (PoE) adapter to connect the camera to
the network, and the power will be provided at the same time.
●
Plug the power adapter to the terminal block by inserting the wire with
white lines to the right pin and the other wire to the left pin.
4
Connecting the Power Cable
The Vandal Proof IP Dome support one digital input and one digital output of
dry contact.
For details on how to enable an installed I/O device, see
I/O Settings,
Administrator Mode
Chapter,
GV-IPCam H.264 User’s Manual
online.
Connecting the I/O Device
-
+
Function
Digital Output
GND
Digital Input
Pin
1
2
3
1
2
3
3
Connecting the Camera
