Configuration
6
Figure 6-8
[RSTP Port Configuration]
Port:
The port ID. It cannot be changed. Aggregations mean any configured trunk group.
Protocol Enabled:
Click on the tick-box to enable/disable the RSTP protocol for the port.
Edge:
Expect the port to be an edge port (linking to an end station) or a link to another
STP device.
Path Cost:
This parameter is used by the STP to determine the best path between
devices. Therefore, lower values should be assigned to the ports attached to faster media,
and higher values assigned to the ports with slower media. Set the RSTP path cost on the
port. Number between 0 and 200000000. When 0 is configured, the system will
automatically generate path cost. The default value
auto
also has the same function.
19
Summary of Contents for GV-POE1611-V2
Page 4: ...ii 11 Specifications 39...
