VLAN Setting
8
VLAN Mode:
Displays VLAN mode: port based / Tag based VLAN. Here you can also
switch back to Port Based VLAN Mode.
Tag Mode:
Add tag
means the outgoing packet of the selected port will be inserted a 802.1Q
tag. Use this setting for your Up- and Downlink Ports in your VLAN Tagged
Network.
Don’t care
means the outgoing packet of the selected port keep the original packet
received at the source port. This is the default setting when starting VLAN
configuration. You should change to either Add or Remove Tag.
Remove tag
means the 802.1Q tag of the outgoing packet of the selected port will
be removed. Use this setting for your Network Connections to PCs. Only packets of
the VLAN Group will be sent.
VLAN Member
The ports need to be made member of your VLAN groups. This is for Tag Based and Port
Based VLAN Mode. The screen here looks different whether you run Tag Based or Port
Based Mode.
VLAN Member in Port Based Mode
Figure
8-3
In Port Based Mode you see a matrix of your 8 Ports. Simply select the port on top screen you
want to configure, click on
Read
, and then select or deselect the ports that are on the same
VLAN group. In this configuration mode you do not need to worry about defining VLAN groups
and VLAN IDs.
23
