15
Using Rocker Switch to Simulate ACC Ignition
For quick control of turning on or off the GV-Mobile System, you can install a rocker switch to
the 3-pin terminal block with the optional power adapter. For the connection and operation,
follow the steps below.
Rocker
Switch
1. For the 3-pin terminal block with optional power adapter, unplug the U-shaped wire from
the Power and Ignition pins.
U-Shaped
Wire
Power
Ignition
Ground
2. Connect the wires of the rocker switch to the Power and Ignition pins respectively.
3. Plug the terminal block to the p
anel’s power pins.
