20
2.1.2 Assigning an IP Address
To assign a new static IP address, log in the Web interface to access the network setting
page.
Note:
If your router does not support DHCP, the default IP address will be
192.168.0.10
.
In this case, it is strongly suggested that you modify the IP address to avoid the IP
address conflict with other GV-IP devices on the same LAN.
1. Open your web browser, and type the default IP address
http://192.168.0.10
. A dialog
box appears.
2. Type the default username and password
admin
. Click
Login
.
3. Click
Setup
, select
Network
in the left menu and select
TCP/IP
.
Figure 2-4
4. Select
Static IP
from the IP Obtain Mode drop-down list.
5. Enter the IP address, subnet mask, and default gateway address. Make sure that the IP
address of the camera is unique in the network.
6. Click
Save
.
