34
For part 2, there are 8 holes each labeled with its diameter.
Remove the plugs and push the wires to the corresponding hole
listed below:
Plug
Figure 2-14
2.6 mm: Audio
2 mm: DC12V / AC24V
1.8 mm: DIDO
Figure 2-15
IMPORTANT:
Use the supplied ruler and leave about 10 cm of audio, power, and
I/O wires between their connectors and the cable seal.
The plugs are used to prevent water from entering the camera
housing. Keep the unused holes plugged and save the removed
plugs for future use.
Only thread the wires through their designated holes on the conduit
connector to make sure the wires are properly sealed.