September 10, 2021
3
2.2 DIP Switch
The DIP switch can switch the system among the following three modes.
[Default Mode]
There is communication between all 10 ports, and power is supplied through
the 8 PoE ports over cables of up to 100 m (328 ft) with a network bandwidth of 1000 Mbps
per port.
[VLAN Mode]
The 8 PoE ports function independently, cannot communicate with one
another, and can only communicate with the 2 uplink ports.
[CCTV Mode]
Allow power supply over cables of up to 250 m in length, but at the expense of
reducing the network bandwidth of the 8 PoE ports to 10 Mbps per port.
Note:
After changing the mode, it is required to restart the system for the change to take
effect.
3. Rear Panel
The AC power socket for powering the system is located at the rear panel and accepts power
input from 100 to 240 V at 50/60 Hz.
