GeoVision GV-4008, User Manual, Page: 4 / 4

May 6, 2010 9
6. To access the frame rate settings, on the Main System, click the Configure button,
select General Setting , select System Configure , and then click the Camera Record
Setting tab. In the Rec Control section, click the Arrow button. The Hardware Rec.
Frame Rate Setting dialog box appears.
Figure 1-6
7. Set the maximum frame rate for motion and non-motion periods so as to save as much
disk space as possible.
Note: The default settings are as follows: Recording Quality is 3, Video Resolution is
720 x 480 (NTSC) or 720 x 576 (PAL), Codec is H.264 and Frame Rate is 30 (NTSC) or
25 (PAL).
May 6, 2010 10
Specifications
GV-4008 GV-4008 x 2
Interface PCI-E
Input Type
DVI x 2
(for Video and Audio)
DVI x 4
(for Video and Audio)
Video Input 8 Cams 16 Cams
Audio Input 8 Channels 16 Channels
240 fps (NTSC) 480 fps (NTSC) S/W
(CIF)
200 fps (PAL) 400 fps (PAL)
240 fps (NTSC) 480 fps (NTSC)
Recording Rate
H/W
(D1) 200 fps (PAL) 400 fps (PAL)
NTSC 240 fps 480 fps
Display Rate
PAL 200 fps 400 fps
H/W 720 x 480 720 x 480
NTSC
S/W 360 x 240 360 x 240
H/W 720 x 576 720 x 576
Video Resolution
PAL
S/W 360 x 288 360 x 288
S/W
Geo MPEG4, Geo MPEG4 (ASP), Geo H264, Geo
H264 V2
Video
Compression
Format
H/W H.264
Audio Compression Format
G.711
GV-NET/IO Card Support Yes
GV-Multi Quad Card Support No
Dimensions (W x H) 169 x 110 (mm) / 6.65 x 4.33 (in)
Note:
1. GV-4008 does not support the TV-Out function.
2. To work together with GV-4008, GV-NET/IO Card V3.1 must be set in the I/O Box
Mode and connected to the PC through USB.
3. In screen divisions, the largest division is set to D1 resolution and the other divisions
to CIF resolution.