© R&D Center “GeoStar navigation” Ltd. 2012-12-25
9
2.4.
Assembly Drawing
Figure 3: Assembly Drawing
3.
How to Use the Board
3.1.
USB Driver
If the board is going to be used with personal computer, it should have USB driver been
installed. The driver establishes two virtual COM ports for communicating with GeoS-3 over
serial ports. If demo SW
GeoSDemo
3
®
is used for evaluating GeoS-
3 module then it’s not
necessary to install USB driver as USB driver is already integrated into
GeoSDemo
3
®
installer.
If
GeoSDem
o
3
®
is not used, USB driver (VCP Driver) should be installed; it is downloadable
from the following URL link:
