AC-23 Accelerometer User Manual
11.08.2022 / V17 6 / 15
GS_AC-23_UserManual_V17
3
Mounting
Figure 2, AC-2X housing
Small size and single bolt attachment allow the AC-2X to be easily installed saving installation time. Levelling
is accomplished via three-point levelling screws.
a
Do not overtighten the three-point levelling mechanism. This may damage the sensor.
Figure 3, Sensor housing dimensions
The accelerometer must be firmly mounted to a surface and levelled, as the application requires. Check to be
sure that the accelerometer is aligned to produce the desired output signals. Acceleration in the direction
indicated on the case will produce a positive output signal. The orientation definitions as shipped are:
X = East
,
Y = North
and
Z = Vertical (Up)
.
The accelerometer has single-bolt, 3-feet-levelling mechanism.
