8
MUX ID 30
MUX ID 20
MUX ID 1
MUX ID 10
SmartMux ID Setup
SmartMux IDs are determined by the use of mini dipswitches at the front of each unit. These are usually preconfigured before you receive
them, according to your system design.
[1] Not used
-
always have
DOWN
[2] 120
Ω
Termination Resistor
-
only have
UP
when at the end of the string
[1] RS232/RS485 Switch
-
DOWN
for RS485
[2] Not for customer use
-
always have
DOWN
The setup is based on zero index binary, with the least
significate bit at the front.
Examples:
1 in binary is 00000001; on the mux it will be 10000000
15 in binary is 00001111; on the mux it will be 11110000
WHY back to front?!
