8
LID HOLDERS
There are two lid holders on the back
edge of the grill base.
To use them, slide the lid gently back in
an arc to rest within their grip.
To release, first lift up then move in an
arc forward.
CARE AND CLEANING
Caution: To avoid accidental
burns, allow your grill to cool
completely.
This product contains no user
serviceable parts. Refer service to
qualified service personnel.
Unplug and allow grill to cool
before disassembling and cleaning.
Thoroughly clean all parts after
each use.
Remove temperature control probe
(DO NOT IMMERSE). Wipe with a
damp cloth and dry thoroughly.
Remove grill plate and empty drip
tray.
To remove tray: extend full length,
then press tabs to release.
Wash grill plate, drip tray, sliding
tray, and lid in warm water and dish
soap. Wipe dry.
Important:
Do not use metallic
scrubbing pads, steel wool or any
abrasive cleaners to clean any part of
your grill; use only nylon or nonmetallic
scrubbing pads.
Caution:
Temperature control probe
receptacle must always be completely
dry before use. Make sure receptacle is
dry before inserting control probe.
Note:
This product is not intended for
outdoor storage.
GIO3000_IB_18252-000.indd 8
9/28/17 4:23 PM
