4
Polarized Plug
This appliance has a polarized plug (one blade is wider than the other).
To reduce the risk of electric shock, this plug is intended to fit into a
polarized outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician. Do
not attempt to modify the plug in any way.
Short Cord Instructions
A short power-supply cord is provided to reduce the risk resulting from
becoming entangled in or tripping over a longer cord.
Do not use an extension cord with this product.
Electric Power
If the electrical circuit is overloaded with other appliances, your appli-
ance may not operate properly. It should be operated on a separate
electrical circuit from other appliances.
Plasticizer Warning
CAUTION:
To prevent Plasticizers from migrating from the finish of the
countertop or tabletop or other furniture, place
NON-PLASTIC
coasters
or placemats between the appliance and the finish of the countertop or
tabletop.
Failure to do so may cause the finish to darken, permanent blemishes
may occur or stains can appear.
9
User Maintenance Instructions
This George Foreman
TM
2-Slice Long Slot Toaster requires little mainte-
nance. It contains no user serviceable parts. Do not try to repair it your-
self. Any servicing requiring disassembly other then cleaning must be
performed by a qualified appliance repair technician.
Cleaning
CAUTION: Do not immerse Toaster, Cord, or Plug in water or other
liquid.
1. Always unplug the Toaster and allow it to cool fully before cleaning.
2.
Crumb Tray:
The Crumb Tray is located at the bottom of the Toaster.
For ease in cleaning, grasp the Crumb Tray Handle and pull all the
way out. Brush crumbs from the Tray and, if necessary, wipe with a
clean, damp cloth. Always dry the Tray thoroughly before replacing.
When replacing the Tray, be sure to push firmly so that it is fully
inserted in the bottom of the Toaster.
3.
Keep-Warm Cover:
To remove the Cover, turn the Toaster on its side,
Cover facing up. Pull down on the Keep-Warm Cover Latch and raise
the Cover. Slide the Hinge Release Button to the right. This button is
located on the bottom of the Toaster. Lift the right side of the hinge
up then slide the Keep-Warm Cover to the right to release the left
hinge pin. Wash the Cover with a soft cloth in warm, soapy water.
Rinse and dry thoroughly. Wipe out any crumbs in the Keep-Warm
Chamber with a soft, damp cloth. Do not use abrasive cleansers, as
they may scratch the surfaces.
To reinstall the Keep Warm Cover, insert the left hinge pin into the
opening, slide the Hinge Release Button to the right and lower the
right side of the hinge into position. Release the Hinge Release
Button and close the Keep-Warm Cover.
4.
Exterior:
Wipe surfaces with a clean, damp cloth. Do not use abra-
sive cleansers, as they may scratch the surface.
Storage
Unplug unit, allow to cool, and clean before storing. Store in its box in a
clean, dry place. Never store it while it is hot or still plugged in. Never
wrap cord tightly around the appliance, use the Cord Storage Area on
the bottom of the Toaster. Do not put any stress on the cord where it
enters the unit, as it could cause the cord to fray and break.
Jade_GR_GFT1W,C,R,I_IB_8-8-03 8/8/03 4:00 PM Page 7
Summary of Contents for GFT1C
Page 10: ...C st bu W in el C ti an to 1 2 3 4 5 6 7 8 C 10 ...
Page 11: ...11 ...
