GEONAUTE ONchannel 510, Manual

Page: 10 / 14

9
5 CALL-RING TONE
You can send a Call-ring tone to other PMR users to give an alert that you want to communicate with
them.
Î Î
Press the
Call
button
You will hear a ring tone for about two seconds. «
TX
» icon appears on the LCD screen. Any other
units within the transmitting range and tuned to the same channel and sub-channel (if applicable) will
hear the Call-ring tone.
5.1 Selecting a Call-ring tone
The ONchannel 510 is equipped with 15 different types of Call ring tones.
Î Î
Press the
Menu
button 8 times, the "
C01
" icon will display and flashing on the LCD
screen.
Î Î
Press the Up or Down button to select the desired call ring tone.
A respective call ring tone sound will be played when changing from one tone to another.
Î Î
Press the PTT button to confirm your setting.
5.2 Setting the Roger beep
The Roger beep is a tone which is automatically transmitted whenever the PTT button is released.
This alerts the receiving party to inform that you have intentionally ended the transmission, and you
are now in receive mode.
Î Î
Press the Menu button 9 times, the « ON » icon is blinking on the LCD screen.
Î Î
Press the Up or Down button to select the Roger beep On/Off.
Î Î
Press the PTT button to confirm your setting.
5.3 Setting the key tone On or Off
This feature allows the ONchannel 510 to emit a confirmation tone after pressing each button.
Î Î
Press the
Menu
button 10 times, the "
ON
" icon is blinking on the LCD screen.
Î Î
Press the Up or Down button to select the key tone On/Off.
Î Î
Press the PTT button to confirm your setting.
5.4 Setting the Dual Watch Mode
Your ONchannel 510 is capable of monitoring two channels, the current and another (dual watch)
channel. If the unit detects a signal on either channel, it will stop and receive the signal.