45
45
EN
ate
LL
ed.
ys
EN
In this mode the watch has a stopwatch which can store up to 100 split
times. These split times can be stored for later use in 30 sessions
called “runs”.
The “CHRO” information is displayed for three seconds when you
enter this mode. The stopwatch is accurate to 1/100s for one hour
(minutes/seconds/hundredths) then to 1 second up to a limit of 24
hours (hours/minutes/seconds). When a user measures a lap time,
the display stops for six seconds to show the split times and lap times.
Using the stopwatch:
Press A to start the stopwatch.
Press B to stop the stopwatch.
Press A to continue timing.
Hold down B for three seconds to store the current session and go to
the next session by resetting the counters to zero.
Recording split times:
Press A to start the stopwatch.
Press A to record a split time.
Press B to stop the stopwatch.
Press A to continue timing. Hold down B for three seconds to store the
current session and go to the next session by resetting the counters
to zero.
To delete the session data without changing session.
When the stopwatch is in use:
Press B to stop the stopwatch.
Hold down D for three seconds to reset the stopwatch and split times to
zero.
To display the number of memory slots and split times available:
When the stopwatch is at zero, press E: the screen displays FREE and the
number of free slots.
The display automatically returns to the stopwatch after three seconds.
2MW500EN.qxd:NOTICE_MW500_2 11/12/07 12:14
