GEONAUTE KEYMAZE 500, Documentation

Page: 33 / 53

i
If you have deleted your routes, it will be impossible to recover them.
2.4.2.2. SAVE WAYPOINT
In the flag there is the symbol associated with this point and its name. By default, the points are given the symbol
n
and a number as a name. You can change
the symbol and name of this point.
Using the and buttons, go to the
n
symbol and confirm with OK. A list of symbols appears. Select the one which you want.
Using the and buttons, go to the name of the point and confirm with OK. An alphabet appears. Select the letter which you want. Continue in the same way
to select the other letters to make up the name of the point. When the name is complete select the
Ã
character and confirm by pressing OK. The name can
contain up to 6 letters.
Under the flag the coordinates of this point and its altitude are displayed. Although you can modify them, you don't have to. However, the altitude can be
corrected if you note for example that it is not exact (by referring to a hiking map, or an information board).
Once all details are correct, go to CONFIRM? and confirm with OK. The point is stored in the Keymaze.
i
The coordinates which will be stored depend on the quality of the GPS signal. Even if the signal is very strong, there will always be a little
inaccuracy. A point recorded at the same place on different days will not have exactly the same coordinates. Inaccuracy ranges from 10 to 30 metres.
2.4.2.3. GO TO WAYPOINT (Waypoint management)
i
We assume that the MAP MODE AND E-COMPASS functions are activated. Go to MAIN MENU/SETTINGS/DISPLAY SETTING.
2.4.2.3.1. LIST WAYPOINT (List all waypoints)
Sous menus associés :
·
LIST WAYPOINTS
·
DELETE ALL