G1-LOTUS
TM
GNSS NR QUICK GUIDE PAGE 9
a.
The blue Bluetooth LED on the receiver interface to make sure the
connection between the tablet and the receiver is functioning as it
should (soft LED1 would turn orange or red)
b.
The cellular or WiFi connection on the tablet to the correction
source, in case the correction data is not coming through (soft LED2
would turn orange or red)
12.
Soft LEDs 4 and 5 indicate saving output1 and output2 to files, while soft LEDs 6
and 7 are to show logging the base and rover raw observations to files
Note: Soft filenames are assigned automatically by the LoTUS
TM
software in the
form: aaaDOYxx.ext
Where
aaa: three-letter prefix set by the user,
DOY: Day of Year,
xx: two alphanumeric characters between 0-Z allowing for 36x36=1296
files per day
ext: three letter extension set by the user
13.
Trouble shoot any problem before proceeding to the next step to collect or to
stake out survey data
14.
To stop recording data to the uSD card, press and hold the REC button for 5
seconds
15.
To power down the LoTUS
TM
receiver, press and hold its POWER button for 5
seconds until all LEDs turn off
16.
To quit the LOTUS
TM
software, click the main window “X” menu bar button
