manualshive.com logo in svg

Geokon 8020-59, Instruction Manual

Share
Download
Geokon 8020-59 Instruction Manual Download Page 21

15 

 

Example:  
(Assumes the use of default values and transducer type of 4500S-100): 
 

Minimum Limit = 0 digits 
Maximum Limit = 25,000 digits 
Digits Span = 25,000 – 0 = 25,000 digits 

 

Vout = 3.250V

 

 

 

 

Digits = Maximum Limit – (Vout * (Digits Span/5V)) 

 

Digits = 25,000 – (3.25V * (5000 digits/V)) 

 

Digits = 25,000 – 16,250 

 

Digits = 8750 

 

4.4 Connection to a Voltage Input DAS 

 
The 8020-59 outputs a voltage (V OUT, 0-5V) that is proportional to the digits of the transducer 
being read (ENABLE = 0V (or disconnected) in Single Channel Mode, after the first of two 
CLOCKS in 16-Channel Mode, or after each CLOCK in 32-Channel Mode). The 8020-59 offers 
a digits to voltage output with 20-bit resolution (one part in 1,048,576) of the span of the 
transducer (default span is 25,000 digits). This output voltage can be input directly to any Data 
Acquisition System capable of reading a 0-5V analog voltage. 
 
The 8020-59 also outputs a voltage proportional to the temperature (also on V OUT) of the 
transducer being read (ENABLE = 5V in Single Channel Mode or after the second of two 
CLOCKS in 16-Channel Mode). The 8020-59 offers a temperature voltage output with 10-bit 
resolution (one part in 1024) over a 100º C span (-20º C to +80º C). See Section 4.6 for specific 
calculations. 
 

4.5 Connection to a Current Input DAS 

 

The 8020-59 sources a current (I-OUT, 4-20mA) that is proportional to the digits of the 
transducer being read (ENABLE = 0V (or disconnected) in Single Channel Mode, after the first 
of two CLOCKS in 16-Channel Mode, or after each CLOCK in 32-Channel Mode). The 8020-59 
offers a digits current output with 20-bit resolution (one part in 1,048,576) of the span of the 
transducer (default span is 25,000 digits). This output current can be input directly to any Data 
Acquisition System capable of reading a non-isolated 4-20mA analog current.  

 

The 8020-59 also outputs a current proportional to the temperature (also on I-OUT) of the 
transducer being read (ENABLE = 5V in Single Channel Mode or after the second of two 
CLOCKS in 16-Channel Mode). The 8020-59 offers a temperature current output with 10-bit 
resolution (one part in 1024) over a 100º C span (-20º C to +80º C). See Section 4.6 for specific 
calculations. 

 

See Appendix C for the various voltage and current measurement options. 
 

 

Summary of Contents for 8020-59





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands